skip to Main Content

TOK coupling and TOK coupling system

发布时间 2017年1月17日 - 类别 产品.

Engine manufacturers rely on the TOK coupling system from REICH

The highly flexible TOK couplings from REICH are specifically designed to meet the high requirements of engine manufacturers and test bench operators. They increase the service life and availability of all drive components, thus enhancing productivity. Manufacturers and operators have ever-growing expectations regarding the efficiency of engine test benches which should excel by high reliability and short standstill times, and all that at a low total cost of ownership.

Our customers are supplied with couplings and coupling shafts which are tailor-made to the specific engines. Designed for speeds of up to 10,000 rpm, they are particularly well suited for test benches for combustion engine testing. The couplings are mounted between the engine and the dynamometer and offer a high torsional flexibility and a torque transmission capacity from 100 up to 70,000 Nm. This is why they are applicable for a wide spectrum of engines. Endurance test benches, research and development test benches, and end-of-line test benches provide safe and reliable operation with the use of the TOK coupling system.

REICH furthermore provides highly flexible TOK couplings for flexibly mounted engines used in drive trains in the most varied of industries. The coupling series comprises coupling sizes for a torque range from approx. 1600 Nm to 140,000 Nm. The TOK 910.1, for example, was specifically developed for large gas engines up to a power rating of 4,500 kW. This coupling for power generation plants is mounted between the engine and a generator.

The TOK 910.1 will be showcased at the Hannover Fair from 24 to 28 April 2017. You will find us in Hall 25, Booth E25.

Highly flexible couplings from REICH not only offer an extraordinarily long service life but also shift critical resonance frequencies of the drive train to below the operating speed range. The design of the coupling is accomplished by employing torsional vibration calculations which we perform upon the customer's request. For this purpose, various rubber hardnesses are available so that the variation options of our in-house manufactured elastomers bring about an optimisation of the drive train. Alternating torques of the engine which are generated by the combustion processes are dampened. This way, all drive components are protected against critical shocks and loads, thus increasing the service life and availability of the entire installation.

Image: REICH TOK 910.1 on an europallet
Author: Marzena Serrien / U. Bentele / March 2017

新闻报道下载

文章详情:

发布时间: 2017年1月17日

类别: 产品

如对该文章有疑问,请使用我们的联系表格或直接致电: +49 (0)234 959160

更多新闻

及时了解资讯。
Coupling solutions for optimum mobility on rails

In order to cope with the enormous cost pressure encountered in the railway and traffic industry, the right course should be set well in advance - bec…

阅读更多...
REICH is expanding its product portfolio by the RCT series

Reich-Kupplungen has expanded its product portfolio withthe addition of the RCT series, consisting of torsionally stiff flange couplings for diesel en…

阅读更多...
New ELBO Development for Large-Scale Drives in Offshore Wind Turbines and Rope Winches

In line with our guiding principle D2C ‚Designed to Customer‘, we have reacted to specific customer enquiries with the further development of the ELBO…

阅读更多...
SMM 2014, Hamburg Reports Record Turnout

Impressive balance: 50,000 trade visitors at the 26th world's leading maritime trade fair. Industry meets the challenges with optimism and inventivene…

阅读更多...
Interview with Herwarth and Christian Reich

REICH celebrates its 75th anniversary. A perfect opportunity to take a glance at the past and the future of the Dipl.-Ing. Herwarth Reich GmbH togethe…

阅读更多...
Inexhaustible heat source – REICH Report Nr. 2/2021

REICH relies on the earth when it comes to heating. The entire company is heated with geothermal energy. And cooled too - depending on the season. The…

阅读更多...
Reich is expanding its location

Bochum. The economic crisis has not affected the Bochum entrepreneur Reich. He has been manufacturing drive technology at Vierhausstraße for over 65 y…

阅读更多...
Fast Claw Coupling for Gearbox Test Benches

High-speed coupling for 'greatest technical performances' - Reliable testing at high speed - Fast, strong and robust Anyone involved in the building o…

阅读更多...
Global strategy and market development

International sales meeting in Bochum – REICH presents and discusses its global sales strategy, market development and investments. REICH once again w…

阅读更多...
Video: radial element change of the ARCUSAFLEX coupling

The video shows a radial element change of the ARCUSAFLEX coupling.

阅读更多...
Couplings in Test Bench Engineering

Trust is good, control is better: This ancient saying fits especially well to the sense and purpose of test benches - because their effective-ness sta…

阅读更多...
REICH 的 RCT 联轴器适用于高性能且具有失效安全性的驱动装置

来自波鸿的 Dipl.-Ing. Herwarth Reich GmbH 公司在其用于泵驱动的扭转刚性法兰联轴器中使用了自主开发的弹性体,以此减轻振荡和振动,从而实现无共振的平稳运行。 REICH-Kupplungen 公司通过 RCT 联轴器(Rubber Coated Tooth)实现了亚临界运…

阅读更多...
还没找到?
REICH ARCUSAFLEX®
Back To Top