Skip to content

Inexhaustible heat source – REICH Report Nr. 2/2021

Published on 5 August 2021 - category Sustainability.

REICH relies on the earth when it comes to heating. The entire company is heated with geothermal energy. And cooled too - depending on the season. The use of geothermal energy makes both possible.

Geothermal energy is a renewable energy and has become indispensable for our supply as an environmentally friendly source of heat. We also rely on solar energy and generate electricity with our photovoltaic systems. But unlike the sun, geothermal energy has an unbeatable advantage: It is always available and inexhaustible. Directly below us. In 2012, we drilled 105 metres deep into the earth to install a geothermal heating system for REICH and now generate energy geothermally.

Perfect conditions are actually found at a depth of 125 metres i.e. it is warmer, which would have been even more advantageous for an effective geothermal heating system. So why didn’t we just drill deeper? Because of Bochum’s past in the mining industry, drilling deeper into the ground was not possible, but even with the twenty-metre short-fall in drilling depth, a functioning geothermal heating system is assured. That’s what we were advised in 2012 when we built our new hall. We coordinated the drilling for the new geothermal heating system with the construction work. And the geothermal planners in charge were right.

Due to Bochum’s past in the mining industry, it was not possible to drill deeper into the ground

Heating, cooling, saving
Thanks to the probe boreholes, in which plastic pipes are inserted vertically into the ground, the higher temperature at depth is used to heat the building by means of a heat transfer fluid transported to the surface. The heat pumps then feed it into our heating system. In winter, we use the geothermal heat gained in this way for heating, and in summer to cool our hall for assembly and shipping. This works because in the cooler winter months thermal energy is extracted from the warmer ground. In summer, the ground is cooler, so cooling is achieved by using the thermal energy.

The ventilation system in the assembly and shipping hall works in the same way as in the rubber production via a heat exchanger. However, the preheated supply air is further heated in the assembly and shipping hall because the temperatures are lower than in the rubber production - the vulcanisation presses make it warmer there.

Geothermal energy is much more sustainable than conventional heating methods, but the heat pumps required consume significant amounts of electricity. Here we can balance this out to a great degree using our own photovoltaic systems. For our energy supply, we at REICH look both upwards towards the sun and downwards - deep into the soil of Bochum, in which we are firmly rooted as a company.

Press release Download

Post details:

Published on: 5 August 2021
Category: Sustainability

If you have any questions about this article, use our contact form or simply call: +49 (0)234 959160

More news

Well informed.
Hybrid drive for track construction machines

For its innovative drive concept, Plasser & Theurer has opted for the combination of highly flexible ARCUSAFLEX®…

read more...
REICH donates 5.000€ to Aktion Deutschland Hilft e.V.

REICH donates 5.000€ to Aktion Deutschland Hilft e.V. Our deepest sympathy goes to the victims and relatives…

read more...
iTOK – new TOK for industrial applications

REICH-Kupplungen presents iTOK – the latest development in the well-known TOK range. A highly flexible transmission element with…

read more...
HighSpeed MMS couplings for HORIBA

HORIBA achieves 25,000 revolutions per minute in its test bench for electric motors with the MMS-HS coupling…

read more...
ELBO – Flexible Pin-type Coupling – a revolutionary design – a new design concept

ELBO couplings from REICH-Kupplungen are flexible pin-type couplings and designed to compensate for axial, radial and angular…

read more...
Corona Work Protection at REICH-Kupplungen Evaluated as Exemplary

Dipl.-Ing. Herwarth Reich GmbH takes responsibility seriously – be it for its products or the health of…

read more...
RCT Couplings from REICH for Powerful and Fail-Safe Drives

Torsionally stiff flange couplings for pump drives from the Bochum-headquartered Dipl.-Ing. Herwarth Reich GmbH come with specifically…

read more...
REICH-vlcsnap-2021-06-28-12h49m09s950
Video: radial element change of the ARCUSAFLEX coupling

The video shows a radial element change of the ARCUSAFLEX coupling.

read more...
ARCUSAFLEX Couplings: Why Experience & Longevity Wins

There is little doubt that for many companies, new product development is a key part of their…

read more...
REICH-Interview-mit-Herwarth-und-Christian-Reich-export
Interview with Herwarth and Christian Reich

REICH celebrates its 75th anniversary. A perfect opportunity to take a glance at the past and the…

read more...
RCT-Couplings: Powerful and reliable drives

Our torsionally stiff flange couplings for pump drives come with specifically developed elastomers and are able to…

read more...
REICH-Kupplungen supplies couplings with fire protection certified elastomers to the railway industry

As a result of the further development of its in-house elastomers, Dipl.-Ing. Herwarth Reich GmbH in Bochum…

read more...
Not yet found what you are looking for?
REICH ARCUSAFLEX®
Back To Top